How do I set up the Ploom X Advanced manual lock?

Ploom AURA

Here’s how to set up the manual lock feature on your Ploom AURA device:

• Place your Ploom AURA on charge using the USB-C cable.
• Open and close the slider.
• Press the button area twice.
• Press the button area again and hold until the device vibrates and the LED indicator starts blinking slowly.
• While the LED indicator is blinking, you have 20 seconds to enter a combination of slider movements and/or button area presses (up to 10 inputs). The combination you choose will be your code for manually unlocking the device.
• The device will vibrate, and the LED indicator will blink to confirm that the code has been successfully set.

To unlock the device, simply enter your unique combination/code. You have 2 seconds for each input. The device will vibrate when unlocked.

For more information, watch our short video. [Link to “How to lock your device” video]

Ploom X Advanced

You can lock your Ploom X Advanced device with a code made of a combination of button presses and slider movements, so only you can unlock it. Here’s how to set up manual locking:

• Connect your Ploom X Advanced to the charger.
• Open and close the slider cover.
• Press the button area until Ploom X Advanced vibrates.
• The LED indicator will blink for about 20 seconds. During this time frame, enter a combination of button area presses and/or slider movements. You can use a minimum of 3 and a maximum of 10 movements. This will be your code for unlocking the device.
• After 20 seconds, the device will vibrate, and the LED light will blink twice.
• Your unique combination is now set, and the device is locked.

Before each use, you will need to enter this combination, which only you know, to unlock your device.